When attempting a bar code scan via DataPotector 8, I receive the following, and it just sits there, BUT I can force a scan via the menu at the library
[Normal] From: MSM@*.*.*.com "HP:MSL6000 Series_devbackup" Time: 7/22/2013 11:11:14 AM
Media session 2013/07/22-19 started.
[Normal] From: UMA@*.*.*.com"HP:MSL6000 Series_devbackup" Time: 7/22/2013 11:11:14 AM
STARTING Media Agent "HP:MSL6000 Series_devbackup"
Prior to this I had to disable the Windows robotics drivers, because the devices were showing claimed by HP.
So I did the following;
On Windows, robotics drivers are automatically loaded for enabled tape libraries. To use the library robotics with Data Protector on a Windows system, disable the respective Windows driver.
- Steps
- In the Control Panel, double-click Administrative Tools.
- Double-click Computer Management and then click Device Manager.
- Expand Medium Changers.
- Right-click the medium changer, for example 4mm DDS Medium Changer, and then select Disable.
- Restart the system to apply the changes. The robotics is now ready to be configured with Data Protector.
Services are running, and devices are present.
FYI This same MSL6000 worked with a older machine running dp5.50, I can't go and look at that config because DP5.50 is corrupted
C:\Program Files\OmniBack\bin>omnisv -status
ProcName Status [PID]
===============================
crs : Active [1612]
mmd : Active [2204]
kms : Active [2460]
hpdp-idb : Active [1672]
hpdp-idb-cp : Active [1724]
hpdp-as : Active [1592]
omniinet : Active [1992]
Sending of traps disabled.
===============================
Status: All Data Protector processes/services up and running.
C:\Program Files\OmniBack\bin>devbra -a
[Warning] From: DEVBRA@*.*.*.com"" Time: 7/22/2013 12:59:34 PM
[90:11] Unrecognized option "-a" => ignored
Tape HP:Ultrium 2-SCSI Path: "scsi5:0:2:0C" SN: "HUL4D02975"
Description: HP LTO drive
Revision: F6AW Device type: lto [13] Flags: 0x0001
Tape HP:Ultrium 2-SCSI Path: "scsi5:0:1:0C" SN: "HUL4D02987"
Description: HP LTO drive
Revision: F6AW Device type: lto [13] Flags: 0x0001
Exch HP:MSL6000 Series Path: "scsi5:0:0:0" SN: "3G44LRT5XMS8"
Description: HP StorageWorks MSL 6000 Series
Revision: 0423 Flags: 0x0006 Slots: 58 Drives: 4
Drive(s) SN:
"N/A"
"N/A"
"N/A"
"N/A"
Tape HP:Ultrium 2-SCSI Path: "scsi4:0:4:0C" SN: "HUL5K04528"
Description: HP LTO drive
Revision: F6AW Device type: lto [13] Flags: 0x0001
Tape HP:Ultrium 2-SCSI Path: "scsi4:0:3:0C" SN: "HUL5K04618"
Description: HP LTO drive
Revision: F6AW Device type: lto [13] Flags: 0x0001
Thank you Paul