Hi,
I'm not able to reconfigure the library. If I use DP autoconfigure device, libary (robotics and two drives) is discovered, but cannot configure the library options, and TAPE MEdia Type is used (see attachment). If I manually configure library, only the robotic address is found, but not the drives.
On the Media Agent server I have to leavethe Windows driverenabled. RSM service is not present on the server.
devbra -dev output is following
Exch IBM:3573-TL Path: "Changer0:0:1:1" SN: "00L4U78T3867_LL1"
Description: CLAIMED:Control device
Revision: C.20 Flags: 0x0012 Slots: 24 Drives: 2
Drive(s) SN:
"10WT037623"
"10WT036815"
Tape IBM:ULT3580-HH6 Path: "Tape1:0:1:0C" SN: "10WT037623"
Description: CLAIMED:Tape device
Revision: E6R3 Device type: tape [9] Flags: 0x0011
Tape IBM:ULT3580-HH6 Path: "Tape0:0:0:0C" SN: "10WT036815"
Description: CLAIMED:Tape device
Revision: E6R3 Device type: tape [9] Flags: 0x0011
From my point of view, it seems to be all correctly configured.
In the meantime I have asked to my customer to check the san zoning and reboot the Media Agent server.
Is there any way to modify Media Type by hand (I assume this is a parameter wrote into IDB) ?
tnx to all
Davide