Quantcast
Channel: All Data Protector Practitioners Forum posts
Viewing all 10494 articles
Browse latest View live

Re: Restoring a tape created on a different device

$
0
0

I did open a ticket with HPE and their answer was that I have to blow away the current index, scan the tape and then import it again. Support believes that data protector was not intended to restore in a different location nor with a different device.


New DPTIPS: VMware vSphere Advanced GRE Plug-In and Mixed Case Paths

Re: (DP) Support Tip: VixDiskLib errors when VEPA and vCenter are installed on the same system

$
0
0

"Copy the libldap_r.dll and liblber.dll from \Program Files\OmniBack\lib\vddk\AMD64 to \Program Files\OmniBack\bin."

Where do I do this, is this on the backup server where the virtual env integration is installed !!

Re: (DP) Support Tip: VixDiskLib errors when VEPA and vCenter are installed on the same system

$
0
0

Have you installed the VEPA integration component on the vCenter server?

Re: (DP) Support Tip: VixDiskLib errors when VEPA and vCenter are installed on the same system

$
0
0

No, I only copied the those 2 files libldap_r.dll and liblber.dll to that location \Program Files\OmniBack\bin.

You where saying OR, Do I have to do the first thing also?

Install the vCenter and the VDDK on separate servers.
or
Copy the libldap_r.dll and liblber.dll from \Program Files\OmniBack\lib\vddk\AMD64 to \Program Files\OmniBack\bin.

 

Re: (DP) Support Tip: VixDiskLib errors when VEPA and vCenter are installed on the same system

$
0
0

If you have not installed the VEPA integration component on the vCenter server, this document does not apply.

Re: (DP) Support Tip: VixDiskLib errors when VEPA and vCenter are installed on the same system

$
0
0

Sow to solve my issue I also have to install VEPA integration component on the vCenter server??

Re: (DP) Support Tip: VixDiskLib errors when VEPA and vCenter are installed on the same system

$
0
0

No, this document does not apply to your issue.

You can open a new thread in this forum or a support case to get assistance.


HP DP SAP HANA integration

$
0
0

Hello everyone.We're using HP DP 9,00 version.We added the client,but the HANA integration is not visible.

Please help if you had met the problem like this

Regards

None of the Disk Agents completed successfully.

$
0
0

Environment:

DP 9.07, also seen with 9.04
VMware ESXi 6.0.0 4510822
vCenter Server 6.0.0  build 3018524

Every now and then the backup for my different jobs fails with the error None of the Disk Agents completed successfully. Session has failed

I can't seem to figure out what's going wrong.

The only thing I know, I have other backup jobs where I backup vm's from other vcenter servers 5.5 and 5.1 and there I have no issues.
It's seem related to this vcenter 6.0.0

bad session report

[Normal] From: BSM@bu-dco02.bel.centric.lan "D_Incr VV_Astea"  Time: 1/12/2016 22:30:08
 Backup session 2016/12/01-31 started.

[Normal] From: BSM@bu-dco02.bel.centric.lan "D_Incr VV_Astea"  Time: 1/12/2016 22:30:10
 OB2BAR application on "bu-dco06.bel.centric.lan" successfully started.

[Normal] From: VEPALIB_VMWARE@bu-dco06.bel.centric.lan "/Oostkamp"  Time: 1/12/2016 22:30:11
 Resolving objects for backup on vCenter 'vc-gda01.its.centric.lan' ...

[Normal] From: BSM@bu-dco02.bel.centric.lan "D_Incr VV_Astea"  Time: 1/12/2016 22:30:13
 OB2BAR application on "bu-dco06.bel.centric.lan" disconnected.

[Critical] From: BSM@bu-dco02.bel.centric.lan "D_Incr VV_Astea"  Time: 1/12/2016 22:30:13
 None of the Disk Agents completed successfully.
 Session has failed.

[Normal] From: BSM@bu-dco02.bel.centric.lan "D_Incr VV_Astea"  Time: 1/12/2016 22:30:13

 Backup Statistics:
         
  Session Queuing Time (hours)         0,00       
  -------------------------------------------     
  Completed Disk Agents ........          0         
  Failed Disk Agents ...........          0         
  Aborted Disk Agents ..........          0         
  -------------------------------------------     
  Disk Agents Total  ...........          0         
  ===========================================     
  Completed Media Agents .......          0         
  Failed Media Agents ..........          0         
  Aborted Media Agents .........          0         
  -------------------------------------------     
  Media Agents Total  ..........          0         
  ===========================================     
  Throttled Gateways ...........          0         
  Gateways Total ...............          1         
  ===========================================     
  Overall Deduplication Ratio ..          -           
  ===========================================     
  Mbytes Total .................       0 MB       
  Used Media Total .............          0         
  Disk Agent Errors Total ......          0   

 

 

Re: DP Migration from 6.2 to 9.02

$
0
0

Hi,

Been having a nightmare with licensing. Can anyone help on how to get my 9.x licence (we have a valid SAID):
I have my orig. DP 6.11 certificates but having trouble getting HP to link me to the correct 9.x certificates.
I have been given "OneDrive" 9.x to replace my 6.11 licences:
Cell Mgr. for Win/Linux (1)
Direct attached tape drive for Win/Netware/Linux(1)
Tape drive for SAN / all platforms (1)

This doesn't seem right as I am now unable to run any scheduled backups as the 9.00 server is asking for a Cell Mgr. licence!

Any idea where the link to 9.<latest> is too please?

(DP) Support Tip: The DP GUI is performing slowly and/or errors such as "Connection to CRS failed".

$
0
0

The problem stems from issues with reverse DNS lookups.  One thing that might help is to set the following omnirc variables
on the cell manager:

  OB2_IPC_DNSRETRYCOUNT=1
  OB2_IPC_DNSRETRYTIME=200

There are also some improvements to the reverse lookup algorithms in Data Protector 9.08

Re: backups are completing with [61:3003] Lost connection to Unknown named "noname" err

$
0
0

I am using DP 9.07 and backups were running fine from last few months.

now backups are completing with below error. any update for this issue

Lost connection to Unknown named "noname"
on host .
Ipc subsystem reports: "IPC Invalid Packet Size"

ORA-12:8019 Integration cannot be configured SBT_LIBRARY=/opt/omni/lib/libob2oracle8_64bit.so

$
0
0

HI All,

We are Facing error in Oracle RMAN backup configration in new server and new cell manager.

Cell Manager in Win2012 & Client Hp-UX B.11.31 U ia64

 

Error:-

 

SBT_LIBRARY=/opt/omni/lib/libob2oracle8_64bit.so
CHILDERROR:1
Process exit code: 1, Signal: 0
RMAN PID=5594
APPERROR:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on DP_TEST channel at 12/03/2016 15:22:32
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
HPUX-ia64 Error: 8329: Unknown system error
Additional information: 7110
ORA-19511: Error received from media manager layer, error text:
SBT error = 7110, errno = 8329, sbtinit: internal error - invalid argument(s)
Recovery Manager complete.
 

Storeonce doesnt show up as multipath in MPIO

$
0
0

I connected my storeonce to fiber channel and zoned it to my 2008 R2 Server. San Surfer shows two devices, both of which are the WWN of the Storeonce FC ports.

I rebooted and it still doesnt detect the store once FC ports as a single device (MPIO). Is there a DSM I need to install?


DP Migration from 6.11 to 9.X, licensing

$
0
0

Hi,

Been having a nightmare with licensing. Can anyone help on how to get my 9.x licence (we have a valid SAID):
I have my orig. DP 6.11 certificates but having trouble getting HP to link me to the correct 9.x certificates.
I have been given "OneDrive" 9.x to replace my 6.11 licences:
Cell Mgr. for Win/Linux (1)
Direct attached tape drive for Win/Netware/Linux(1)
Tape drive for SAN / all platforms (1)

This doesn't seem right as I am now unable to run any scheduled backups as the 9.00 server is asking for a Cell Mgr. licence!

Any idea where the link to 9.<latest> is too please?

HP DATA PROTECTOR

$
0
0

Hi Team,

We are currently using hp data protector version 6.11 & want to restore the catalog of this version in hp data protector version 9.x for the data restoration purpose. So I just want to know, technically will it work or is there any complications to do this. Kindly guide me. Thanks in advance.

Re: HP DATA PROTECTOR

$
0
0

Hi,

Can any one reply on this...?

(DP) Support Tip: /var/opt/omni/tmp/AppServer/vfs directory gets full

$
0
0

[Problem]
/var/opt/omni/tmp/AppServer/vfs directory is steadily growing and that will eventually lead to out of disk space problems.

[Cause]
It's a bug of JBOSS 7.1.1 that DP8.1x and DP9.0x use .

[Workaround / Fix]
A change request has been submitted to consider the issue in future releases .
As a workaround , vfs directory can be removed while DP services stop safely .

ex.)
/var/opt/omni/tmp/AppServer #omnisv stop
HPE Data Protector services successfully stopped.

/var/opt/omni/tmp/AppServer #ls
auth vfs work

/var/opt/omni/tmp/AppServer #mv vfs vfs_back

/var/opt/omni/tmp/AppServer #omnisv start
HPE Data Protector services successfully started.

/var/opt/omni/tmp/AppServer #ls
auth vfs vfs_back work

/var/opt/omni/tmp/AppServer #ll vfs
total 48
drwxrwxrwx 190 hpdp hpdp 16384 Dec 1 20:47 deploymentb8fdf48748ba3167
drwxrwxrwx 14 hpdp hpdp 8192 Dec 1 20:47 temp8913e11eebd29131

Re: None of the Disk Agents completed successfully.

Viewing all 10494 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>