Hi Folks,
I am facing the below issue,
The Archive log backups (for DB2) is running fine until the message "
[Normal] From: BMA@ignite "HP:Ultrium 6-SCSI_1_ignite_bk" Time: 10/8/2014 6:03:59 PM
COMPLETED Media Agent "HP:Ultrium 6-SCSI_1_ignite_bk"" and it hangs there.
When there is new archive logs are flushed out from DB2 side, DP loads the medium and backup it again, but the session remains open. It never ends.
I have attached the full session report.
I would really badly need help from DP gurus.
Thanks a milllion in advance.
DP version : 8.1 with all the latest patches running HP-UX.11.31
DB2 version : 10.5 with latest patches running on HP-UX 11.31
==================================
Session report
==================================
[Normal] From: BSM@ignite "STP_Archive_log" Time: 10/8/2014 5:51:13 PM
Backup session 2014/10/08-20 started.
[Normal] From: BMA@ignite "HP:Ultrium 6-SCSI_1_ignite_bk" Time: 10/8/2014 5:51:14 PM
STARTING Media Agent "HP:Ultrium 6-SCSI_1_ignite_bk"
[Normal] From: BMA@ignite "HP:Ultrium 6-SCSI_1_ignite_bk" Time: 10/8/2014 5:51:15 PM
=> UMA@ignite@/dev/rchgr/autoch1
Loading medium from slot 25 to device /dev/rtape/tape7_BESTn
[Normal] From: OB2BAR_DB2ARCH@jade "db2stp" Time: 10/8/2014 5:50:14 PM
Starting OB2BAR Backup: jade:db2stp:STP:0:0:0 "DB2"
[Warning] From: BMA@ignite "HP:Ultrium 6-SCSI_1_ignite_bk" Time: 10/8/2014 5:52:31 PM
[90:195] Physical position of the last segment is not consistent with the
position information from the database. Instead of expected last
segment number 18, last segment on the tape is 28.
[Normal] From: OB2BAR_DB2ARCH@jade "db2stp" Time: 10/8/2014 5:50:34 PM
Backup Profile:
Run Time ........... 0:00:20
Backup Speed ....... 1.90 MB/s
[Normal] From: OB2BAR_DB2ARCH@jade "db2stp" Time: 10/8/2014 5:50:34 PM
Completed OB2BAR Backup: jade:db2stp:STP:0:0:0 "DB2"
[Normal] From: OB2BAR_DB2ARCH@jade "db2stp" Time: 10/8/2014 5:50:34 PM
File /db2/STP/log_dir/NODE0000/LOGSTREAM0000/S0000501.LOG backed up successfully
[Normal] From: BMA@ignite "HP:Ultrium 6-SCSI_1_ignite_bk" Time: 10/8/2014 6:03:05 PM
/dev/rtape/tape7_BESTn
Medium header verification completed, 0 errors found.
[Normal] From: BMA@ignite "HP:Ultrium 6-SCSI_1_ignite_bk" Time: 10/8/2014 6:03:23 PM
Ejecting medium '25'.
[Normal] From: BMA@ignite "HP:Ultrium 6-SCSI_1_ignite_bk" Time: 10/8/2014 6:03:23 PM
=> UMA@ignite@/dev/rchgr/autoch1
Unloading medium to slot 25 from device /dev/rtape/tape7_BESTn
[Normal] From: BMA@ignite "HP:Ultrium 6-SCSI_1_ignite_bk" Time: 10/8/2014 6:03:59 PM
COMPLETED Media Agent "HP:Ultrium 6-SCSI_1_ignite_bk"
==============================================================
Regards,
Sha.