Re: The execution of the script was interrupted (most probably the script...
Most of what I found on this error involves having OES2 installed on the Linux system, which, to my knowledge, makes it look like a Novell server. Please check for this, if it does not have this...
View ArticleRe: DP 8.1 and Server 2012r2 issue
IFC = Interface Controller On the "Unknown Medium Changer", this is normal and is what shows in all versions of Windows for an EML. There is no driver for it. I've searched high and low and...
View ArticleCell manager issue: DP 6.20 on Windows server / OpenVMS client
We are running HP Data Protector v6.20 on a Windows cell manager server and an OpenVMS client host running OpenVMS 8.4 We are receiving the following error message when attempting to backup an OpenVMS...
View ArticleRe: DP 8.1 and Server 2012r2 issue
I didin't know that about the EML, lesson learned What version of Windows are you running on the Media agent where you got the 'devbra' output from? Looking at the 'devbra' output Drive(s) SN: ","...
View ArticleRe: Restore from Object Copy - HP Data Protector 6.10
Thank you andre80, and sorry for comming abit too late. Well Like I said After the copy is done to another external drive and I can see the copy present, How do I go about restoring that?(Incase my...
View ArticleDP 8.1 Insufficient permissions, access denied when starting the gui
We have installed a small environment to test DP 8.1. The environment consists of: 1 * AD server (Windows 2003 EE x64)1 * DP8.1 (Windows 2008 R2 x64)1 * client (Windows 2008 R2 x64) DNS is running,...
View ArticleIPC Cannot Connect
Hello, I have HPDP client on HP-UX system but currently am not able to take the backup of that system when i'm click on the client system to select the source path, it is showing "IPC Cannot Connect"...
View ArticleCell Manager installation on HP-UX (PA-RISC)
Hi,I'd like to know if it's possible to install Data Protector Cell Manager A.08.01, or. A.08.10 on PA-RISC server (rp3440), running HP-UX 11.31?I have already gone through the support matrices, where...
View ArticleVMware lan-free backup
Hello all!Could you please advice how to make SAN FC backups of vmware vCenter vms on many ESX servers in different datacenters to FC tape and d2d devices?What and where must be presented, what system...
View ArticleRe: DP 8.1 and Server 2012r2 issue
This would be off the Cell Manager, so 2012r2. I'm taking it, from what you are saying, that even though it is supported as a Cell Server it isn't supported for any media operations. Thus I'll need...
View ArticleRe: IPC Cannot Connect
Restart the service if you haven't: inetd -c Or run an upgrade against that client from the cell manager (achieves the same thing). Once the service is restarted telnet to the client via port 5555 and...
View ArticleRe: DP 8.1 Insufficient permissions, access denied when starting the gui
Log in as the user who installed DP on the system. Then edit the users from within the DP GUI to add the needed logins. DP only puts in the user who installed DP and/or the user used for the DP...
View ArticleRe: Restore from Object Copy - HP Data Protector 6.10
When you do a restore there should be a "Copies" tab when setting it all up. Go to this tab and select the appropriate session that you'd like to restore from and click the "Properties" button. From...
View ArticleRe: The execution of the script was interrupted (most probably the script...
At this point, you will need to open a case with the Response Center, and have this problem debugged
View ArticleRe: DP 8.1 and Server 2012r2 issue
That's correct, and it really surprised me too. I would have thought that they would have waited and updated the support matrix all at once
View ArticleRe: Cell manager issue: DP 6.20 on Windows server / OpenVMS client
This happens because a client that is not secured recognizes only the primaryhostname of the Cell Manager. Requests from any other client are allowed, butare logged to the inet.log file.ActionSecure...
View ArticleRe: Scheduled VMware routine timeout (VEPA hanging)
Unless someone else in the Forum has see this before, I think that you will probably need to open a case with the response center, and have them debug a scheduled backup. If it was me handling the...
View ArticleRe: DR backup of data from HP D2D to MSL 2024 using HP Data Protector
You don't say if you have Data Protector installed on your DR site. Also, can you explain, in more detail, what is meant by "...cannot take a backup from DR site...". If you are trying to do a direct...
View ArticleRe: Cell Manager installation on HP-UX (PA-RISC)
I looked at the support matrix, and footnote 6 is definately confusing. I have asked for a clarification, and will update teh posting when I get it
View ArticleRe: VMware lan-free backup
Do you have Data Protector installed? If so, have you done the VMware integration? When backing up ESX virtual machines, you can back them all up by backing up the Virtual Center, or you can backup the...
View Article